Episodes

  • The One Where They Are Deep... Deep In The Shag W/Keith Johnson (Ep 172)

    The One Where They Are Deep... Deep In The Shag W/Keith Johnson (Ep 172)
    Jul 12 2025

    This week, with Zac MIA, we are joined by guest Keith Johnson for Episode 172 of "Off The Cut"! This week, Eric continues his grievances with the Shaper Origin's finicky tape and its inability to cut perfectly straight lines. As well as his own planer woes, noting inconsistent feeding on the left side.

    The discussion shifts to the challenges of installing inset drawer fronts and a preference for Soliche drawer slides over Blum. We also delve into contractor quality and the frustrations of home renovations, highlighting issues like poor trim work and unpainted balusters. Keith explains his decision to drop his contractor's license due to new bond requirements. Do Woodworkers make the worst customers?

    Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com ⁠

    Be sure to hit up the links below to get even more content from us!

    Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432 ⁠⁠ ⁠

    -------------------------

    Aftershow

    Consider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!

    ⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast ⁠⁠⁠

    -------------------------

    Hang Out with Us

    Watch the live stream of the podcast on YouTube!

    ⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠

    -------------------------

    Pick Up Some Merch!

    Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠

    -------------------------

    Follow Zac

    Instagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds ⁠⁠⁠⁠

    YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠

    TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠

    -------------------------

    Follow Eric

    Instagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠

    YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠

    TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠

    -------------------------

    Follow Deric

    ⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠

    ---------------------------

    Shoutout to:

    KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO

    And WTB Woodworking, our newest sponsor! Check out the giveaway over here:https://www.wtbwoodworking.com/giveaway


    #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
    Show more Show less
    1 hr and 17 mins
  • The One Where They Hunt For Intimidation (Ep. 171)

    The One Where They Hunt For Intimidation (Ep. 171)
    Jul 5 2025

    This week we welcome our newest sponsor, Bill Burkle at WTB Woodworking, who's absolutely crushing it with his expanding physical store and a huge Wagner moisture meter giveaway. Plus, Bill drops a Fusion 360 shortcut on Eric that just might change everything for your CAD game!

    Then, it's grievance time! From the Shaper Origin's finicky tape and their adequate customer service to the never-ending museum display stands Deric has been working on; it's a delicate dance of setting clear expectations to avoid future headaches and backing yourself into a corner with the build. A topic tease into the blurry line between "inspiration" and "ripping off" in the creative world. How similar is too similar? We try to figure it out!

    Got a question that you want us to answer? Send us an email at ⁠⁠offthecutpodcast@gmail.com⁠ ⁠

    Be sure to hit up the links below to get even more content from us!

    Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠ ⁠⁠ ⁠

    -------------------------

    Aftershow

    Consider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!

    ⁠⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠⁠⁠

    -------------------------

    Hang Out with Us

    Watch the live stream of the podcast on YouTube!

    ⁠⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠⁠

    -------------------------

    Pick Up Some Merch!

    Windbreaker - ⁠⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠⁠

    -------------------------

    Follow Zac

    Instagram - ⁠⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠ ⁠⁠⁠⁠

    YouTube - ⁠⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠⁠

    TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠⁠

    -------------------------

    Follow Eric

    Instagram - ⁠⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠⁠

    YouTube - ⁠⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠⁠

    TikTok - ⁠⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠ ⁠

    -------------------------

    Follow Deric

    ⁠⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠⁠

    ---------------------------

    Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ ⁠⁠


    #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
    Show more Show less
    1 hr and 7 mins
  • The One Where They Go Ultrasonic (Ep. 170)

    The One Where They Go Ultrasonic (Ep. 170)
    Jun 28 2025
    We pull back the curtain on video editing, including how we "fake it till we make it" with B-roll. We're geeking out over 3D printer filaments, especially glass-filled ABS, is it our new favorite (even if it still stinks!)? Then, things get real in the shop with a painting disaster that left Deric’s garage floor and door looking a little emo. We brainstorm ways to clean it up, including some heavy-duty razor blades and paint stripper. We get handy with outdoor power tools that have interchangeable heads – total game-changers for yard work. What is the cost of perfection? How to navigate tricky client expectations. And finally, we give a sneak peek at upcoming videos, including a PlayStation 5 mod. We spill the tea on how to handle sponsored content without annoying you (it's all about that natural flow!). Plus, a quick shout-out to our new favorite tool: the ultrasonic cleaner – even if it makes a terrible noise.Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com ⁠Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432 ⁠⁠ ⁠-------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast ⁠⁠⁠-------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠ -------------------------Follow ZacInstagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds ⁠⁠⁠⁠YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠ -------------------------Follow EricInstagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠ YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠-------------------------Follow Deric⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO ⁠⁠#Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
    Show more Show less
    1 hr and 9 mins
  • The One Where They Get Hooked On Craft! (Ep. 169)

    The One Where They Get Hooked On Craft! (Ep. 169)
    Jun 21 2025

    Eric, Zac and Deric jump right into the "painting woes" of finishing woodworking projects, discussing the pros and cons of different finishes like Rubio and the challenges of touch-ups. They also explore the confusing landscape of modern power tool branding, with humorous takes on DeWalt and Milwaukee's product lines. The conversation veers into memorable (and sometimes horrifying) renovation stories, including dealing with textured walls and unconventional demolition methods. Can you burn drywall?

    Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠

    Be sure to hit up the links below to get even more content from us!

    Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ ⁠

    -------------------------

    Aftershow

    Consider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!

    ⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠⁠⁠

    -------------------------

    Hang Out with Us

    Watch the live stream of the podcast on YouTube!

    ⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠

    -------------------------

    Pick Up Some Merch!

    Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠

    -------------------------

    Follow Zac

    Instagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠⁠⁠⁠

    YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠

    TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠

    -------------------------

    Follow Eric

    Instagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠

    YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠

    TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠ ⁠ ⁠

    -------------------------

    Follow Deric

    ⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠

    ---------------------------

    Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠⁠


    #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
    Show more Show less
    1 hr and 11 mins
  • The One Where They Fart... For Science!

    The One Where They Fart... For Science!
    Jun 14 2025

    Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠

    Be sure to hit up the links below to get even more content from us!

    Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ ⁠

    -------------------------

    Aftershow

    Consider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!

    ⁠⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠⁠⁠

    -------------------------

    Hang Out with Us

    Watch the live stream of the podcast on YouTube!

    ⁠⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠⁠

    -------------------------

    Pick Up Some Merch!

    Windbreaker - ⁠⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠⁠

    -------------------------

    Follow Zac

    Instagram - ⁠⁠⁠⁠https://www.instagram.com/zacbuilds⁠⁠⁠⁠

    YouTube - ⁠⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠⁠

    TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠⁠

    -------------------------

    Follow Eric

    Instagram - ⁠⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠⁠

    YouTube - ⁠⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠⁠ ⁠

    TikTok - ⁠⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠⁠ ⁠ ⁠

    -------------------------

    Follow Deric

    ⁠⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠⁠

    ---------------------------

    Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠⁠ ⁠

    #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast

    Show more Show less
    1 hr and 1 min
  • The One Where They Reuse Paint Tray Liners (Ep. 167)

    The One Where They Reuse Paint Tray Liners (Ep. 167)
    Jun 7 2025

    Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠

    Be sure to hit up the links below to get even more content from us!

    Interested in starting your own podcast? Check out Streamyard: ⁠⁠⁠https://streamyard.com/pal/c/5926541443858432⁠ ⁠

    -------------------------

    Aftershow

    Consider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!

    ⁠⁠⁠https://www.patreon.com/offthecutpodcast⁠⁠

    -------------------------

    Hang Out with Us

    Watch the live stream of the podcast on YouTube!

    ⁠⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠⁠

    -------------------------

    Pick Up Some Merch!

    Windbreaker - ⁠⁠⁠https://www.spencleydesignco.com⁠⁠⁠

    -------------------------

    Follow Zac

    Instagram - ⁠⁠⁠https://www.instagram.com/zacbuilds⁠⁠⁠

    YouTube - ⁠⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠⁠

    TikTok - ⁠⁠⁠https://www.tiktok.com/@zacbuilds⁠⁠

    -------------------------

    Follow Eric

    Instagram - ⁠⁠⁠https://www.instagram.com/spencleydesignco⁠⁠⁠

    YouTube - ⁠⁠⁠https://youtube.com/@spencleydesignco⁠⁠ ⁠

    TikTok - ⁠⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ ⁠

    -------------------------

    Follow Deric

    ⁠⁠⁠https://linktr.ee/pecantreedesign⁠⁠⁠

    ---------------------------

    Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ ⁠

    #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
    Show more Show less
    58 mins
  • The One Where They Haggle (Episode 166)

    The One Where They Haggle (Episode 166)
    May 31 2025

    We are back with a fresh episode; discussing a recent large-scale building project, working with young tradespeople and a non-profit. We also touch on the challenges of selling merch, practical tool tips (like the effectiveness of Torx screws!), and the surprising world of online shopping.

    Join us for conversations about woodworking, 3D printing, DIY and cross country travel.

    Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠

    Be sure to hit up the links below to get even more content from us!

    Interested in starting your own podcast? Check out Streamyard: ⁠⁠https://streamyard.com/pal/c/5926541443858432 ⁠

    -------------------------

    Aftershow

    Consider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!

    ⁠⁠https://www.patreon.com/offthecutpodcast⁠

    -------------------------

    Hang Out with Us

    Watch the live stream of the podcast on YouTube!

    ⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠

    -------------------------

    Pick Up Some Merch!

    Windbreaker - ⁠⁠https://www.spencleydesignco.com⁠⁠

    -------------------------

    Follow Zac

    Instagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠

    YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠

    TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠

    -------------------------

    Follow Eric

    Instagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠

    YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠ ⁠

    TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco ⁠ ⁠

    -------------------------

    Follow Deric

    ⁠⁠https://linktr.ee/pecantreedesign⁠⁠

    ---------------------------

    Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO ⁠

    #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
    Show more Show less
    1 hr
  • The One Where They Sell Their Streaming Rights (Ep165)

    The One Where They Sell Their Streaming Rights (Ep165)
    May 24 2025

    What fuels our creative fire? This week, Zac and Eric explore motivation and the creator mindset, sharing what drives them to take on new projects and document the journey. You may even get an early look (or listen) at their upcoming work! No aftershow this week, we held our monthly BYOC. Join the top tier over on Patreon and get in on next month's live BYOC hangout with us!Join us for conversations about woodworking, 3D printing, DIY and cross country travel. Got a question that you want us to answer? Send us an email at ⁠offthecutpodcast@gmail.com⁠ Be sure to hit up the links below to get even more content from us!Interested in starting your own podcast? Check out Streamyard: ⁠⁠https://streamyard.com/pal/c/5926541443858432⁠⁠ -------------------------AftershowConsider supporting the show on Patreon to get access to the aftershow and unlock tons of cool perks!⁠⁠https://www.patreon.com/offthecutpodcast⁠ ⁠ -------------------------Hang Out with UsWatch the live stream of the podcast on YouTube!⁠⁠https://www.youtube.com/channel/UCcRJPIp6OaffQtvCZ2AtWWQ⁠⁠ -------------------------Pick Up Some Merch!Windbreaker - ⁠⁠https://www.spencleydesignco.com ⁠⁠ -------------------------Follow Zac

    Instagram - ⁠⁠https://www.instagram.com/zacbuilds⁠⁠ YouTube - ⁠⁠https://www.youtube.com/c/@ZacBuilds⁠⁠ TikTok - ⁠⁠https://www.tiktok.com/@zacbuilds⁠ ⁠ -------------------------Follow EricInstagram - ⁠⁠https://www.instagram.com/spencleydesignco⁠⁠ YouTube - ⁠⁠https://youtube.com/@spencleydesignco⁠ ⁠ TikTok - ⁠⁠https://www.tiktok.com/@spencleydesignco⁠ ⁠ -------------------------Follow Deric⁠⁠https://linktr.ee/pecantreedesign⁠⁠ ---------------------------Shoutout to KM Tools for sponsoring the show! Check out everything they have to offer at ⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠⁠KMTools.com ⁠⁠kmtools.com/SPENCLEYDESIGNCO⁠ #Woodworking #DIY #3DPrinting #Maker #ContentCreation #YouTuber #OffTheCutPodcast
    Show more Show less
    1 hr and 3 mins