Send us a text

Due to the holiday weekend we are running a blast from the past. One of the most requested episodes!

The FrameFrog system creates a seamless pathway for wiring electrified door openings, solving a decades-old problem that has plagued low voltage installers and access control specialists.

• Architects Ron Hicks and construction expert Gary Johnson developed FrameFrog after 20 years of struggling with electrified opening installations
• Traditional methods for electrified openings often fail due to metal connectors breaking or flex conduit being impossible to fish through
• FrameFrog features integrated funnel-shaped ports that guide fish tape automatically through the frame
• The system creates a complete loop connecting all components (door position switches, electric strikes, EPTs, etc.)
• Pre-installation in hollow metal frames eliminates the "division problem" between trades that leads to field conflicts
• Live demonstration showed how easily wire can be fished through the entire frame system in seconds
• Buildings last 50-75 years, making infrastructure for future security needs essential even if not immediately implemented
• System works with all types of access control including POE and traditional low voltage

To learn more about the FrameFrog system or to find a distributor, visit www.framefrog.us or contact Ron directly at ron@framefrog.us.

Support the show

Knowledge is power! Make sure to stop by the webpage to buy me a cup of coffee or support the show at https://linktr.ee/letstalkcabling . Also if you would like to be a guest on the show or have a topic for discussion send me an email at chuck@letstalkcabling.com

Chuck Bowser RCDD TECH
#CBRCDD #RCDD

Send us a text

Chuck Bowser, RCDD, addresses crucial questions about low-voltage systems, covering EMI detection, IP ratings, camera lenses, and safety procedures in this technical deep-dive episode.

• Signs of electromagnetic interference include humming audio, equipment damage, fuzzy screens, ESD shocks, and signal glitches
• Standard installation practices like separation from power cables can often prevent EMI without requiring shielded cabling
• IP ratings use a two-digit system where the first number (0-6) indicates protection against solids and the second (0-8) shows water protection
• Camera lens types include fixed (unchangeable), variable (manually adjustable), zoom (motorized remote control), and multiple (multifocal) options
• Front projection systems require consideration of projector placement, presenter location, screen height, aesthetics, acoustics, and lens selection
• Wire map testing identifies issues like split pairs that continuity testing might miss
• Data center redundancy models range from N (minimum required) to 2N+1 (two complete systems each with spares)
• Lockout tagout procedures prevent injuries during maintenance by ensuring equipment remains powered off
• Never substitute regular grout for proper firestop material as it can damage cables and violate building codes

Join us next Wednesday at 6pm Eastern for more expert low-voltage advice and industry insights.

Support the show

Knowledge is power! Make sure to stop by the webpage to buy me a cup of coffee or support the show at https://linktr.ee/letstalkcabling . Also if you would like to be a guest on the show or have a topic for discussion send me an email at chuck@letstalkcabling.com

Chuck Bowser RCDD TECH
#CBRCDD #RCDD

Send us a text

The telecommunications industry faces a critical shortage of skilled fiber technicians just as the federal government's Broadband Equity, Access and Deployment Program injects $48.5 billion to connect 10.7 million homes currently without internet access.

• Sean Kelly from Light Brigade explains how the skills gap developed as educational systems steered students away from technical trades
• Industry needs 205,000-800,000 new fiber technicians over the next five years while losing experienced technicians to retirement
• Light Brigade launches comprehensive certification programs: CFOE, CBFOT, CBFOS, and CBFOP to address the growing demand
• Certification programs balance theoretical knowledge with hands-on training based on a strict 7:1 student-instructor ratio
• Fiber skills remain transferable between industries from telecom to data centers, 5G deployment, and edge computing
• New digital credentials through Credly provide tamper-proof verification of credentials that can be shared on resumes and social media
• Training options include nationwide open classes or custom on-site training for companies

Would you mind hitting the subscribe button and the bell button to be notified when new content is being produced? If you're listening to us on one of the audio podcast platforms, would you mind giving us a five-star rating?

Support the show

Knowledge is power! Make sure to stop by the webpage to buy me a cup of coffee or support the show at https://linktr.ee/letstalkcabling . Also if you would like to be a guest on the show or have a topic for discussion send me an email at chuck@letstalkcabling.com

Chuck Bowser RCDD TECH
#CBRCDD #RCDD

Send us a text

Chuck explores the complex dynamics between electricians and low-voltage specialists while discussing how to choose between fiber optics and copper cabling in various project scenarios.

• Explaining to customers that specialists are best for specialized work, using the analogy of not going to a podiatrist for a root canal
• Fiber offers more bandwidth, EMI immunity, and longer distances but isn't always necessary and costs more
• Effective project management requires planning, scheduling, resource optimization, and regular quality inspection
• Getting as much information upfront for estimates leads to more accurate pricing and fewer change orders
• Continuous learning and networking with industry professionals is vital for career advancement in ICT
• Future trends to watch include AI applications in project management, smart building technologies, and evolving industry standards

Live after hours with your favorite RCDD every Wednesday at 6 PM Eastern - bring your questions and join the conversation!

Support the show

Knowledge is power! Make sure to stop by the webpage to buy me a cup of coffee or support the show at https://linktr.ee/letstalkcabling . Also if you would like to be a guest on the show or have a topic for discussion send me an email at chuck@letstalkcabling.com

Chuck Bowser RCDD TECH
#CBRCDD #RCDD

Send us a text

PoE extenders create a revolutionary solution for the longstanding 100-meter cable distance limitation by utilizing higher voltage power to boost data signals and extend network reach without sacrificing performance.

• How standard data signals degrade over copper cable due to electrical resistance
• Why 100 meters (330 feet) became the industry standard distance limitation
• Technical explanation of how PoE extenders act as "data truck stops" to refresh signals
• Importance of proper installation techniques including waterproofing for outdoor deployment
• Critical considerations for voltage drop calculations across extended distances
• Real-world applications including security cameras, WiFi access points, and smart buildings
• Evolution of PoE technology with multi-port options for simplified infrastructure expansion
• Grounding best practices to avoid signal interference and ground loops
• Outdoor installation requirements including proper cable selection and enclosure sealing

Check out the PoE calculator app available in both the App Store and Google Play Store to help determine voltage drop and maximum distance calculations for your specific installation. Join us Wednesday nights at 6pm Eastern for live Q&A sessions across all major social platforms.

Support the show

Knowledge is power! Make sure to stop by the webpage to buy me a cup of coffee or support the show at https://linktr.ee/letstalkcabling . Also if you would like to be a guest on the show or have a topic for discussion send me an email at chuck@letstalkcabling.com

Chuck Bowser RCDD TECH
#CBRCDD #RCDD

Send us a text

Chuck Bowser dives into the four families of telecommunication standards and explains how each impacts low-voltage installations across different environments. The conversation clarifies the crucial differences between standards (for performance) and codes (for safety), while offering actionable guidance on testing methodologies and cable management best practices.

• ICT standards fall into four main families: generic standards, premise standards, component standards, and technical service bulletins
• Premise standards vary by building type (commercial, residential, healthcare, data center, industrial, educational) to address specific connectivity requirements
• National Electrical Code (NEC) focuses on safety while standards ensure performance—following standards typically ensures code compliance
• Cable management isn't just about aesthetics but critically impacts performance, bend radius protection, and stress relief on ports
• Three testing methodologies exist: certification (comparing to standards), qualification (data transmission testing), and verification (basic continuity)
• Manufacturers typically require certification testing for warranty purposes, not qualification or verification testing

Remember to catch our next episode where we'll tackle fiber vs. copper benefits, effective project management, and how to create accurate low-voltage project estimates. Every Wednesday at 6pm Eastern.

Support the show

Knowledge is power! Make sure to stop by the webpage to buy me a cup of coffee or support the show at https://linktr.ee/letstalkcabling . Also if you would like to be a guest on the show or have a topic for discussion send me an email at chuck@letstalkcabling.com

Chuck Bowser RCDD TECH
#CBRCDD #RCDD

Send us a text

We explore an innovative tool for low-voltage technicians with inventor Bobby Martin, who created the OmniShelf – a portable magnetic workspace that attaches to metal surfaces for holding laptops, tools, and equipment in the field.

• Bobby developed the idea while working on drilling rigs, noticing the need for a portable workspace
• The OmniShelf features powerful rare earth magnets with approximately 100 pounds of pull force
• Multiple mounting options allow it to attach to various surfaces including metal racks and columns
• Includes features like hardware pockets, storage space, and magnetic surfaces for holding tools
• Perfect for technicians working in server rooms, telecom closets, and other installation environments
• Bobby is developing accessories including risers for cable access, mouse pad attachments, and tool holders
• Available through TheOmniShelf.com, Amazon, Home Depot, Walmart, and industrial suppliers

Check out the OmniShelf at TheOmniShelf.com – an all-in-one solution that will change how you work in the field. Don't forget to join our live stream Wednesdays at 6pm Eastern where you can ask questions about installation, certification, design, and project management.

Support the show

Knowledge is power! Make sure to stop by the webpage to buy me a cup of coffee or support the show at https://linktr.ee/letstalkcabling . Also if you would like to be a guest on the show or have a topic for discussion send me an email at chuck@letstalkcabling.com

Chuck Bowser RCDD TECH
#CBRCDD #RCDD

Send us a text

Chuck welcomes Caroline, Senior VP of Marketing from Bicsi, to discuss the transformational rebranding of Bicsi's fall conference to "Bicsi Beyond" and how it represents a fundamental shift in approach to serve the industry better.

• Bicsi Beyond reimagines the traditional fall conference with a focus on convergence and future technologies
• New session formats include lightning learning, solution rooms, and debates to engage different learning styles
• The conference theme centers on "where innovations and ideas intersect" across adjacent technology industries
• Tracks will cover intelligent infrastructure, wireless innovations, AV integration, data centers, and uniting limited energy
• Conference dates are August 17-20, 2023, at the Venetian in Las Vegas – one day shorter than previous years
• Call for presenters is open until April 4th, seeking innovative topics that address real-world challenges
• Speaker training will be available to help professionals confidently present their expertise
• CECs will be available for attendees, though total numbers are still being determined

To learn more or submit a presentation proposal, visit bicsi.org/beyond before the April 4th deadline.

Support the show

Knowledge is power! Make sure to stop by the webpage to buy me a cup of coffee or support the show at https://linktr.ee/letstalkcabling . Also if you would like to be a guest on the show or have a topic for discussion send me an email at chuck@letstalkcabling.com

Chuck Bowser RCDD TECH
#CBRCDD #RCDD